Accessories Products
Weaver Vale Safety supplies accessories across the UK with practical support for specification, quotation, installation planning and annual inspection.
TDAVIT Portable Base
The TDAVIT Portable Base provides a portable solution for TDAVIT systems where permanent socket installation is not possible. Uses counterweights for stability and can be used on roofs or ground level.
- No permanent installation required
- Counterweight system for stability
- Portable and repositionable
- Suitable for roof and ground applications
- Quick assembly and deployment
- Compatible with all TDAVIT models
Close Coupled Trolley
The Close Coupled Trolley provides smooth travel along gantry beams with minimal headroom loss. For Porta-Gantry Rapide beams.
- Minimal headroom loss
- Smooth beam travel
- For Porta-Gantry Rapide beams
- Heavy-duty construction
Gated Trolley
Porta Gantry Gated Beam Trolley c/w Masterlink. Fits A & B Section Beam.
- Integral safety gate
- Masterlink included
- Fits A & B Section Beam
- Multiple capacity options
Masterlink Trolley (A&B Beam)
Porta-Gantry Captive Beam Trolley c/w Master Link. Unit weight 7.2kg.
- Masterlink included
- Captive beam design
- Fits A & B Section Beam
- Multiple capacity options
Masterlink Trolley (Rapide)
Porta-Gantry Rapide Beam Trolley c/w Masterlink. Unit weight 2.9kg.
- Masterlink included
- For Porta-Gantry Rapide
- Lightweight design
- Multiple capacity options
Double Sheave Carrier (Rapide)
Porta-Gantry Rapide Double Sheave Carrier (wire up to 7mm or rope up to 12mm). Unit weight 2kg.
- Double sheave design
- Wire up to 7mm diameter
- Rope up to 12mm diameter
- For Porta-Gantry Rapide
Single Sheave Carrier (Rapide)
Porta-Gantry Rapide Single Sheave Carrier (wire up to 7mm or rope up to 12mm). Unit weight 2kg.
- Single sheave design
- Wire up to 7mm diameter
- Rope up to 12mm diameter
- For Porta-Gantry Rapide
Sockets & Extensions
A range of mounting sockets for permanent installation and extension arms for increased reach on T-Davit systems.
- Permanent and temporary socket options
- Floor, wall, and parapet mounting
- Extension arms for increased reach
- Tested and certified to standards
Socket Top Mount
Top Mount socket. Suitable for bolting into existing concrete or steel structures, manufactured in galvanised mild steel (GMS). 18mm bolt holes for M16 Anchors.
- Bolt-down installation
- Galvanised mild steel
- 18mm bolt holes for M16 Anchors
- 65mm or 95mm options
Socket Side Mount
Side Mount socket. Suitable for bolting on the side of concrete or steel structures, manufactured in galvanised mild steel (GMS). 18mm bolt holes for M16 Anchors.
- Side-mount installation
- Galvanised mild steel
- 18mm bolt holes for M16 Anchors
- 65mm or 95mm options
Socket Bridge Mount
Bridge Mount socket, suitable for bolting into steel structures, for flush mount facility in walkways/bridges, manufactured in galvanised mild steel (GMS).
- Flush mount design
- For walkways and bridges
- Galvanised mild steel
- Steel structure installation
Socket Flush Mount Cast-In
Flush Mount socket. Suitable for casting into concrete (re-bars), manufactured in galvanised mild steel (GMS).
- Cast into concrete
- Flush with floor level
- Galvanised mild steel
- 65mm or 95mm options
Socket Flush Mount Cast-In Stainless
Flush Mount socket. Suitable for casting into concrete (re-bars), manufactured in 316 Stainless Steel.
- 316 Stainless Steel construction
- Cast into concrete
- Corrosion resistant
- 95mm option
Socket Flush Mount Resin Bond
Flush Mount socket. Suitable for resin bonding into existing concrete, manufactured in galvanised mild steel (GMS).
- Resin bond installation
- For existing concrete
- Galvanised mild steel
- 65mm or 95mm options
Socket Flush Mount Inverted
Inverted socket. Suitable to be mounted flush into existing structure, manufactured in galvanised mild steel (GMS). 18mm bolt holes for M16 Anchors.
- Inverted design
- Flush mount installation
- 18mm bolt holes for M16 Anchors
- 65mm or 95mm options
Socket Pedestal
Top Mount pedestal socket, suitable for bolting into existing concrete or steel structures, manufactured in aluminium. Painted RAL1018 yellow.
- Aluminium construction
- RAL1018 yellow finish
- Bolt-down installation
- 500mm, 800mm, or 1100mm heights
Socket Extension
Aluminium Socket Extension. Suitable for use with 65mm diameter Reid fixed sockets.
- Aluminium construction
- For 65mm diameter sockets
- Increases height of lift
- 500mm, 800mm, or 1100mm options
Porta-Base Counterbalance
Five Piece aluminium Porta base. Compatible with T-Davit and PDQ. Radius 800-1200mm. WLL 600kg. Assembled unit weight 78kg.
- Compatible with T-Davit and PDQ
- WLL 600kg
- Radius 800-1200mm
- Five piece design for portability
- Assembled unit weight 78kg
Porta-Base H Configuration
Three Piece aluminium Porta base. Compatible with T-Davit and PDQ. Maximum radius 800mm. WLL 600kg. Assembled unit weight 63.5kg.
- H configuration design
- Compatible with T-Davit and PDQ
- WLL 600kg
- Maximum radius 800mm
- Assembled unit weight 63.5kg
Porta-Base Trench Mount
Porta-Base Trench mount Certified as part of an anchor device to EN795:2012 Type B - 1200mm maximum radius.
- EN795:2012 Type B certified
- Trench mount installation
- 1200mm maximum radius
- Anchor device compatible
Porta-Base Height Adjustment Kit
Porta-Base Counterbalance Basket height adjustment - 4 off Extended Levelling Screw and Foot Assembly.
- Compatible with Porta-Base Counterbalance
- 4x Extended Levelling Screw
- 4x Foot Assembly
- Height adjustment capability
Universal WindUp Jack Legs
Porta-Gantry Wind up jack leg system to provide 250mm height adjustment in each leg for uneven ground. Set of 4. Unit weight 9kg each.
- 250mm height adjustment per leg
- For uneven ground applications
- Set of 4 legs
- Compatible up to WLL 5000kg
- Unit weight 9kg each
Need project support?
Contact Weaver Vale Safety for UK-wide support with Reid Lifting equipment, including quotations, installation planning and annual inspection.